Home

3 Steps to Remove Limescale from Materials

3 Steps to Remove Limescale from Materials

You must be wondering what Limescale deposit is over materials? It is a calcium carbonate deposit left behind after the evaporation of water from the surface. With time, this deposit builds up and forms white crystals. Often, limescale forms on appliances used in homes such as shower heads and taps.

Fortunately, this deposit can be removed easily by using elbow grease or vinegar. However, there are some additional steps to be followed for the removal of limescale to leave a sparkling surface.

Step 1: Remove Limescale from Appliances

Limescale can be removed in various ways, one of them is using vinegar or acetic acid. Vinegar is a great limescale cleaner capable of cleaning even the toughest stains without actually affecting the surface underneath. Acetic acid is a gentle and biocompatible chemical that makes it an excellent alternative to cleaning agents used in appliances.

  • For cleaning coffee makers or kettles, fill them with equal parts of vinegar and water.
  • Lemon juice can be used as a substitute for vinegar.
  • For dishwashers or washing machines, pour vinegar into the drawers of the appliance.

After applying the vinegar, let it sit for some time. This results in effective cleaning of the material. You can run a vinegar cycle processing this, as the acid will work with the heat to remove the limescale from the inside of the appliances. After the vinegar cycle, run a water cycle for cleaning the appliance off the left-out vinegar and dirt.

Step 2: Removing Limescale from Taps

Take any absorbent material like a rag or a towel and soak it in vinegar. The entire material should be soaked in vinegar and not a mere fragment of it. Rinse it out of excess water but make it as wet as possible. Wrap this material around the tap, and use rubber bands for holding it. Make sure that the entire surface of the tap is being held by the towel. After an hour, remove the towel or the rag.

After this, you can wipe the faucet with a neat cloth to remove the vinegar remnants. The head of the faucet might need extra attention as it accumulates the majority of the limescale. Take a small bowl of vinegar and submerge the head in it. Wipe the head of the tap using clean water and a cloth piece to clean it completely.

Step 3: Remove Limescale from Toilet Surface

To remove the toilet surface, you need to control the water level and operate it while it is flushed. The adjustment has to be made counterclockwise. After this, a borax vinegar mixture has to be poured into the toilet and make sure the spotted areas are being covered by the solution. Scrub the areas with a toilet brush and flush the toilet well. Don’t forget to re-adjust the water level of your flush after this.

Final Words

Limescale deposits can be tricky to clean, but it is not so difficult to deal with them. Follow the steps to clean them regularly and there you go! A clean faucet, tap, or toilet surface awaits you and increases your confidence.

Leave a Reply

This website uses cookies. By continuing to use this site, you accept our use of cookies.